Mon–Sat · 9am–7pm
Home/Sliding Doors/uPVC Sliding Doors in Coimbatore
uPVC Sliding Doors

uPVC Sliding Doors in Coimbatore

A sliding door is what most Coimbatore homes use to connect a living or dining room to a balcony, terrace, or back garden. Glassterr manufactures uPVC sliding doors at our Pannimadai factory — full-height glazed panels that slide along a bottom track, opening the room up to outside without taking up any swing space. We size to your opening, build with steel-reinforced profile, fit branded rollers sized to the panel weight, and install with proper threshold sealing for the monsoon. Common configurations are 2-panel, 3-panel, and 4-panel; larger spans typically move to a slide-and-fold (bifold) system instead.

In plain terms

What this means

A uPVC sliding door is structurally a much larger and heavier version of a sliding window. The panels are floor-to-ceiling (or near it), the glass is typically 8-12mm toughened, and the rollers are sized for panel weights of 40-80 kg each. The track sits at floor level, with the top frame carrying weatherstripping. Most Coimbatore installations use a 2-panel configuration (one slides, one fixed) for openings 5-8 ft wide, or 3-panel (two slide over a central fixed) for 8-12 ft. Above that, slide-and-fold makes more sense because sliding only gives you 50% clear opening even with multiple panels.

Where it suits

Best for

  • Living rooms opening onto a balcony — the most common Coimbatore application
  • Dining rooms connecting to a terrace or back garden
  • Bedrooms with private balcony access on upper floors
  • Commercial spaces — cafés, showrooms, restaurants — wanting indoor-outdoor connection
  • Replacement of older aluminium sliding doors that have started leaking or sticking
How it works

Construction & spec

  • Reinforced multi-chamber profile sized for door weights — heavier section than window profile
  • Branded rollers (Roto, Siegenia, or equivalent) rated to actual panel weight
  • Toughened glass 8-12mm depending on panel size — safety code compliant
  • Interlock and weatherstrip along the closing edge — rain and dust sealing
  • Threshold detail designed for Coimbatore monsoon — water drains outward, not inward
Questions

Common buyer questions

How wide can a uPVC sliding door be?

Single-panel sliders go up to about 4 ft wide; 2-panel up to 8 ft; 3-panel up to about 12 ft. Beyond that, slide-and-fold (bifold) systems make more sense because sliding only gives you 50% clear opening regardless of how many panels you add.

Will a sliding door seal against Coimbatore monsoon?

Yes if correctly built and fitted. The threshold detail matters most — water needs to drain outward away from the room, weatherstrip needs to be continuous, and the wall-to-frame seal needs to be properly caulked. We do all three. Where doors fail in monsoon, the failure is almost always installation, not the door itself.

How heavy is the glass and does the wall need reinforcement?

A typical 4ft × 7ft sliding panel with 10mm toughened glass weighs around 65 kg. The wall structure supporting the door head needs to be load-bearing or have a proper RCC lintel — we'll assess this during measurement and let you know if any reinforcement is needed before fitting.

Can I have a sliding door with mesh for mosquitoes?

Yes — an additional mesh track works the same way as on sliding windows. The mesh panel slides separately. We build the frame for it from the start; retrofitting later is usually messier.

How does pricing work compared to a sliding window?

Per-square-foot, sliding doors cost about 30-40% more than equivalent-spec sliding windows because of the heavier profile, larger rollers, thicker glass, and harder installation. A 7ft × 8ft 2-panel sliding door is typically ₹45,000-75,000 depending on spec.

Related Guides

You might also need

Related guides covering this topic from other angles — different products, applications, or contexts.

Ready to discuss your job?

Send us the room and rough opening size — we'll measure, design the panel split, and quote.